Developer mode under Windows 7 might not work as expected.
Reason for it seems to be Win7 host ip configuration to be not usable.
Fix for this is easy.
First, configure developer mode on the jPhone:
1) enable dev mode
2) set password
3) optional: set ip address for usb connectivity
Then configure Win7 host:
1) connect your jPhone with usb to the Win7
2) from the pc, open network & sharing center
3) select "Change adapter settings"
4) open the adapter labeled with "Remote NDIS based Internet sharing device"
5) go to properties
6) select entry for IP V4
7) enter a static ip (in the same subnet of the phone). So if your phone has 192.168.2.15 (default), you can put 192.168.2.10 for example
8) set phone ip address as gateway & dns entries as well.
Reason for it seems to be Win7 host ip configuration to be not usable.
Fix for this is easy.
First, configure developer mode on the jPhone:
1) enable dev mode
2) set password
3) optional: set ip address for usb connectivity
Then configure Win7 host:
1) connect your jPhone with usb to the Win7
2) from the pc, open network & sharing center
3) select "Change adapter settings"
4) open the adapter labeled with "Remote NDIS based Internet sharing device"
5) go to properties
6) select entry for IP V4
7) enter a static ip (in the same subnet of the phone). So if your phone has 192.168.2.15 (default), you can put 192.168.2.10 for example
8) set phone ip address as gateway & dns entries as well.
No comments:
Post a Comment